Project 1
A wastewater drain had been causing problems since it was laid and had not been adopted due to the poor quality of the installation. As water company approved contractors, we were tasked with resolving the problem and undertook a CCTV survey and determined that the only option was to excavate and replace. No problems have been experienced since.
Project 2
Project was to divert a groundwater spring that had erupted under a house in Weymouth, Dorset. This caused repeat flooding of the property and dangerous icing of the road in winter.
Continuous flooding led to us being asked to undertake a CCTV survey of a storm water system running under a main trunk road through a town, under a hotel and houses. We discovered that the drain had significant root infestation throughout its length leading to the repeat flooding.
The spring was caught in a chamber with a French drain surrounding it installed to drag the water in. As the road is a substantial on hill, we were given permission to discharge the water into the highway drain on the opposite side of the road to stop the dangerous icing hazard.
Project 3
Stage one was an old, 980mm high X 450mm wide, flat bottomed stone arched culvert under the main road. We were told it couldn’t be done but we like a challenge.
We had a multi-layer liner sock specially made and chose a heat cure epoxy resin for its low environmental impact and exceptional high strength. The result is shown.
Stage 2 was the standard drain which was 100 metres long and mainly 300mm Ø salt glaze clay. For this we used a full length sock and epoxy resin which we installed in a single hit after cutting out all the root ingress.
Our Projects
Our team is ready to take your call at 01460 221442